Overview
The Androokie Pro Magnet Combo Kit #2 is a comprehensive magnetic mounting system designed for professional Astera workflows. As a Pro + Combo configuration, it includes two magnet sizes—43mm and 66mm—along with thread extenders, adhesive mounting plates, pull handles, and a mounting plate removal pry tool.
All magnets in this kit feature 1/4-inch male threads and are intended for use with Astera Tube Holders and other compatible 1/4-inch threaded hardware. These magnets do not thread directly into the M5 ports found at the ends of Astera tubes. For direct end mounting, use magnets labeled M5.
Key Features
- Includes 66mm and 43mm rubber-coated 1/4-inch stud magnets
- Thread extenders for added stand-off flexibility
- Adhesive mounting plates for non-ferrous surfaces
- Magnet pull handles for controlled removal
- Mounting plate removal pry tool included
- Protective molded storage case with die-cut insert
Kit Contents
- 16 × 66mm Rubber-Coated 1/4-inch Stud Magnets
- 16 × 43mm Rubber-Coated 1/4-inch Stud Magnets
- 16 × 1-inch 1/4-inch Thread Extenders
- 16 × 1.5-inch 1/4-inch Thread Extenders
- 8 × Small Black Adhesive Mounting Plates
- 8 × Small White Adhesive Mounting Plates
- 8 × Large Black Adhesive Mounting Plates
- 8 × Large White Adhesive Mounting Plates
- 2 × 1/4-inch Female Magnet Pull Handles
- 1 × Androokie Mounting Plate Removal Pry Tool
- Protective molded storage case with die-cut insert
Compatible Fixtures
Designed for mounting Astera Titan Tube, Helios Tube, Hyperion Tube, and similar fixtures using Astera Tube Holders. Also suitable for other lightweight fixtures utilizing 1/4-inch threaded mounting hardware.
Usage Notes
Use 66mm magnets where increased magnetic surface area is required and 43mm magnets when a smaller footprint is preferred. Thread extenders provide additional spacing for cable clearance or alignment. Adhesive mounting plates allow magnets to be used on non-ferrous materials such as wood or scenic elements. Surface condition and preparation significantly affect holding performance.
Important Safety Note
When mounting fixtures overhead, a properly rated secondary safety (such as a safety cable) must always be used. Magnetic mounting hardware should never be the sole means of support in overhead applications.